Aprilaire Humidifier Control Using Excessive Extra Water
If you’ve been keeping an eye on your Aprilaire humidifier, you may have noticed that it’s using a lot more water lately. This can be alarming if you’re not sure why it’s happening, but fortunately, there’s usually an explanation. In this post, we’ll take a look at some of the reasons your Aprilaire humidifier might be using more water and what you can do about it. Stay dry out there!
1. The Water Panel May Be Clogged
One of the most common reasons for your humidifier to use too much water is that the water panel (also known as the evaporator pad) may be clogged. It’s essentially a big wick, and over time it can get clogged with minerals in the water. This reduces its ability to absorb water, so it ends up using more.
2. The Water Level May Be Too Low
Aprilaire Humidifier Control- When you installed your Aprilaire humidifier, you should have set the water level at around half an inch above the bottom of the pad. If you’ve adjusted this since then, or if there’s been some sort of damage that has caused it to sink below this level, it can use too much water because it will constantly be trying to suck in water but won’t be able to find any!
3. The Humidistat May Not Be Set Correctly
Aprilaire Humidifier Control- Your Aprilaire humidifier includes a built-in humidistat that tells it when to turn on and off — that way it only runs when needed. This is an important feature, but it’s also important to make sure the humidistat is set correctly. If it’s not, your humidifier may turn on and off too frequently, which will use more water in the long run.
4. You’re Running It Too Much
Aprilaire Humidifier Control- Even if everything is set up correctly, your Aprilaire humidifier may be using more water if you’re running it constantly. Try turning it off when you’re not home or when the air isn’t too dry. This will save you money on your water bill and help conserve resources!
As you can see, there are a few different reasons why your Aprilaire humidifier might be using more water than normal. Fortunately, most of them are easy to fix — you just need to be aware of them.
How much water should be coming out of the humidifier?
Aprilaire Humidifier Control- A typical Aprilaire water panel/evaporator should soak up a full gallon of water in about 24 hours.
If it takes your unit more than a day to soak up a full gallon, then you should lower the humidistat dial until it does. The unit will still work properly and deliver as much humidity as possible for your home, even if it needs to fire several times during the night.
How do I stop my humidifier from getting wet?
Aprilaire Humidifier Control- If you are having a problem with water getting on the floor or furniture near your humidifier, the unit likely needs to be cleaned. The Aprilaire Model 700 Cleaning and Maintenance Kit will take care of the job for you. The kit comes with an easy-to-follow guide and everything you need to clean your humidifier so it runs more efficiently and doesn’t leak.
How do I turn off the water to my Aprilaire humidifier?
On the back of your Aprilaire humidifier is a large valve that turns the water off and on.
If you need to turn off the water supply for any reason (to clean the humidifier, for example), just turn this valve to the “off” position.
Aprilaire Humidifier Control- When you’re ready to start using the humidifier again, just turn it back on and wait for the tank to fill up with water.