How to Install Furnace Humidifier? / 1 Perfect Guide for Beginners

Connecting Humidifier to Furnace

How to Install Furnace Humidifier?/ Complete Guide for Beginners

Wiring Humidifier to Furnace- Are you like me and can never seem to keep your house at a comfortable temperature? It’s either too hot or too cold! Well, I think I may have found the solution to my problem… a humidifier! But how do I connect my humidifier to my furnace? Keep reading to find out. 

Wiring Humidifier to Furnace- Did you know that adding humidity to the air can help make it feel more comfortable in your home, regardless of the temperature? Humidifiers are a great way to add humidity to the air, and they come in all shapes and sizes. If you’re looking for a way to connect your humidifier to your furnace, keep reading! I’ll show you how easy it is.

  • First, you’ll need to make sure your humidifier is compatible with the temperature control on your furnace. If the temperature control on your furnace is a dial with rotating arrows, then it probably won’t work your the furnace’s justifier.
  • Next, disconnect your furnace’s duct from the air conditioner unit and plug your humidifier into an empty port of the furnace that’s closest to where you have central air installed. This will ensure that cold air from the AC unit doesn’t get mixed up with hot air from the furnace during operation.
  • At this point, if you look closely at both ends of each of your ducts, you should see two small slits followed by two numbers or letters separated by an oblique line or asterisk*. Near the end of your duct, you should see these numbers or letters close to each other with a large space in between (e.g. *ABC*). If they are not visible, make sure you have removed enough of the insulation from around them using a utility knife and you will see them shortly.

How to Install Furnace Humidifier?

 

 

  • How to Install Furnace Humidifier? Once you’ve found the small slits and the numbers/letters, take a piece of masking tape and cover up all but one number (i.e., leave *B uncovered on one side of the tape and *C uncovered on the other side) as shown.
  • Now that we have covered up all but one set of numbers or letters, it’s time to connect our humidifier to our furnace! Take some electrical tape and cover up all but the letter on one side of your masking tape (e.g., if *B is uncovered, cover-up *A* on one side of your electrical tape).
  • Wiring Humidifier to Furnace- Now take any circular object, such as a large coin (a nickel or quarter should work fine), and mark around it using a marker or pencil with a diameter that’s larger than your humidifier’s intake port (where the air goes into be humidified).
  • How to Install Furnace Humidifier? Cut out the piece of ductwork you traced using scissors and place it over your furnace duct where you removed insulation. Be sure this is placed so that both sides with exposed numbers/letters are on separate sides of the taped-off portion of your tape so they will not be blocked when you connect your humidifier to your furnace.
  • Finally, take a clear plastic bag and cut it open so that it’s flat. Cut out a small circular piece of the plastic using scissors and place it over the tape-covered masking tape portion on one side of the opening in the ductwork (e.g., if *B is covered up, cover up *A*). Now connect your humidifier to your furnace by pushing the intake port into this hole until you hear a click, which means it should be secure. Once connected, set the temperature control on your furnace between 60 and 80 degrees Fahrenheit for best results during operation!

Where should the Aprilaire Humidifier be placed on a Furnace?

How to Install Furnace Humidifier? The humidifier should be placed on the furnace so that the airflow is in the opposite direction of the blower. This will help to ensure that the humidified air is not blown out of the house. If you have a gas furnace, be sure to place the humidifier near an open window for proper ventilation.

Can you attach a dehumidifier to your furnace?

How to Install Furnace Humidifier? No, it is not possible to attach a dehumidifier to your furnace. A dehumidifier must have its dedicated ductwork to function properly. If you are trying to connect a humidifier and a dehumidifier to the same system, you will need two separate furnaces.

How to Install Furnace Humidifier? Hopefully, now you know how easy it is to connect your humidifier to your furnace! By following these simple steps, you should be enjoying the benefits of humidity in no time. Thanks for reading!

Best Comparison b/w Aprilaire Humidifier Model 400 & 400M!

Leave a Comment