Perfect Guide for Installing Aprilaire Humidifier 700 

Perfect Guide for Installing Aprilaire Humidifier 700 

Installing Aprilaire Humidifier 700- If you have an old Aprilaire humidifier, likely, you don’t know how to set it. This blog post will show you how to set up your humidifier so that you can start using it and enjoy the benefits of humidity in your home. Follow these simple steps, and you’ll be able to get your Aprilaire up and running in no time!

Step 1: Make sure your humidifier is plugged in.

Installing Aprilaire Humidifier 700- Your Aprilaire should be upright at all times, and you’ll see that there’s a small pinhole (located on the side of the unit) that will release water into your humidifier if it starts to get dry. You’ll want to monitor this area carefully – make sure you don’t let any water run out of the bottom! If you do see some coming out, simply check to make sure that your filter is clean and replace it as needed. Once your filter is clean again, no more water will come out!

Installing Aprilaire Humidifier 700- Plugin your Aprilaire humidifier, or turn it on if it already has power flowing through it.

Note: If you have an Aprilaire humidifier and you don’t know if it has power, you can check the back of the unit. You should see a small switch that says “On” or “Off.” This will determine whether your Aprilaire humidifier has power to it at all times.

See also  Aprilaire Humidifier 700 Model Shuts Itself Off Repeatedly


Perfect Guide for Installing Aprilaire Humidifier 700 

Step 2: Set your humidity level (if applicable).

Installing Aprilaire Humidifier 700- If you’ve already turned on your Aprilaire and plugged it in, there’s another step before we move on to turning your unit on – setting your humidity level! This is an optional step depending on where you live and what kind of environment you prefer to be around. If humidity isn’t something that really bothers you (or maybe even if it is), then feel free to skip this section.

Most modern units have some sort of digital display that will show you the current humidity level in your home. If you don’t have a modern unit, then you’ll want to locate the “humidistat” on your Aprilaire humidifier. This is a small metal knob that will allow you to adjust the humidity level in your home.

Installing Aprilaire Humidifier 700- The higher the number on your humidistat, the higher the humidity level in your home will be. You may have to play around with this setting a bit to get it just right for you and your family – everyone’s different!

Step 3: Turn on your humidifier!

Installing Aprilaire Humidifier 700- Almost there! The last step is turning on your Aprilaire humidifier. For this step, you’ll want to find the switch on the back of your unit that says “On.” Flick this switch to the “On” position, and your Aprilaire will start releasing humidity into your home.

The Aprilaire humidifier is now set up and ready to use! You can monitor the water level in your humidifier by looking at the small pinhole on the side of the unit. If you see that your humidifier is running low on water, you can refill it by pouring some distilled or purified water into the top fill port. Be sure not to fill it above the max line!

See also  Troubleshooting Crane Humidifier Problems

Installing Aprilaire Humidifier 700- Now that you know how to set your old Aprilaire humidifier, you can enjoy all of the benefits that come with using one in your home. Keep an eye on your humidity levels, and be sure to change your filter often for best results!

Is 70% Humidity in the House Good or Bad?